Storage Of Rock Loader

When we finish using the mucking machine for a long time, we need to maintain the equipment and find a place to store the equipment. Then we must check whether some of its performance is stable before storage, which is convenient for the next use. What are the storage issues of the product to help everyone better extend the life of the equipment.

1. When storing this product, we must pay attention to adjusting the working pressure of the hydraulic system. The pressure of the hydraulic system valve of the mucking loading machine is a two-stage control. The pressure during normal use is the overflow from the multi-way directional valve. The valve is controlled at 12MPa. The mucking loading machine company reminds you that if all functions are used simultaneously, the 79kW motor can only withstand the system pressure of 10.8MPa. Now the set pressure is used by staggering the peak pressure points of each part. If the motor is overloaded for multiple times In the event of a thermal relay trip, please adjust the pressure back to 10.8 MPa. If you need to increase the pressure, open the booster valve. The pressure is controlled by the relief valve provided on each multi-way directional valve to 15-16 MPa.

2. The rock loading machine company recommends that you adjust the tightness of the scraper chain of the rock loading machine during storage. The scraper chain is too loose, and it is easy to break the chain or pressure plate screw when the chain scraper chain is reversed, and the scraper chain is too tight. The chain will accelerate to wear and consume more power. Note that the adjustment amount on both sides should be basically the same. After the chain sag is 10-20 mm, lock the adjustment nut. If the adjustment is not enough, the chain can be removed by two sections.

3. When we finish storage, we need to adjust the elastic track of the product in time. The elastic track is too loose, and it is easy to be off the chain.

According to the above storage rock loading machine company's introduction of mucking loading machine storage issues, if we do not adapt to the product, we need to adjust the product's hydraulic system, scraper chain and other places, this check to ensure that the product is normal, if there is a problem in time to repair, then we It will be more convenient the next time you use the product.